Industry, Real Estate & Construction

Constant Velocity Universal Joint Market Professional Survey Report 2018


Constant Velocity Universal Joint4474.jpg

This report studies the global Constant Velocity Universal Joint market status and forecast, categorizes the global Constant Velocity Universal Joint market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in North America, Europe, Japan, China, India, Southeast Asia and other regions (Central & South America, and Middle East & Africa).

Constant-velocity joints (CV joints) allow a drive shaft to transmit power through a variable angle, at constant rotational speed, without an appreciable increase in friction or play. They are mainly used in front wheel drive vehicles, and many modern rear wheel drive cars with independent rear suspension typically use CV joints at the ends of the rear axle halfshafts and increasingly use them on the propshafts (drive shafts).
In the next years, the growth rate of automotive production may decrease in Europe and US, but the enormous automotive population will provide large market demand. In China, the growth rate of automotive production will still be higher than other regions. The situation of automotive constant velocity universal joint industry will be the same.
There is large technical gap between automotive constant velocity universal joints produced by manufacturers from China and abroad. To maintain market share, these domestic manufacturers must invest more on research and development.
In China, the distribution of automotive manufacturers is relatively concentrated, which means the downstream market is concentrated. To get rid of the limit and reduce the risk, automotive constant velocity universal joint manufacturers should seek more automotive manufacturers as cooperative partners.
The global Constant Velocity Universal Joint market is valued at 7410 million US$ in 2017 and will reach 8010 million US$ by the end of 2025, growing at a CAGR of 1.0% during 2018–2025.

The major manufacturers covered in this report

  • GKN
  • NTN
  • AAM
  • Meritor
  • Wanxiang
  • Dana
  • Nexteer
  • Hyundai WIA
  • JTEKT
  • IFA Rotorion
  • SKF
  • Seohan Group
  • Guansheng
  • Neapco
  • Feizhou Vehicle
  • Heri Automotive
  • Xiangyang Automobile Bearing

Download FREE Sample of this Report @ https://www.grandresearchstore.com/report-sample/global-constant-velocity-universal-joint-2018-333

Geographically, this report studies the top producers and consumers, focuses on product capacity, production, value, consumption, market share and growth opportunity in these key regions, covering

  • North America
  • Europe
  • China
  • Japan
  • India
  • Southeast Asia
  • Other regions (Central & South America, Middle East & Africa)

We can also provide the customized separate regional or country-level reports, for the following regions:

  • North America
  • United States
  • Canada
  • Mexico
  • Asia-Pacific
  • China
  • India
  • Japan
  • South Korea
  • Australia
  • Indonesia
  • Singapore
  • Rest of Asia-Pacific
  • Europe
  • Germany
  • France
  • UK
  • Italy
  • Spain
  • Russia
  • Rest of Europe
  • Central & South America
  • Brazil
  • Argentina
  • Rest of South America
  • Middle East & Africa
  • Saudi Arabia
  • Turkey
  • Rest of Middle East & Africa

On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into

  • Ball Type
  • Fork Type

By Application, the market can be split into

  • Passenger Vehicle
  • Commercial Vehicle

The study objectives of this report are:

  • To analyze and study the global Constant Velocity Universal Joint capacity, production, value, consumption, status (2013–2017) and forecast (2018–2025);
  • Focuses on the key Constant Velocity Universal Joint manufacturers, to study the capacity, production, value, market share and development plans in future.
  • Focuses on the global key manufacturers, to define, describe and analyze the market competition landscape, SWOT analysis.
  • To define, describe and forecast the market by type, application and region.
  • To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
  • To identify significant trends and factors driving or inhibiting the market growth.
  • To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
  • To strategically analyze each submarket with respect to individual growth trend and their contribution to the market.
  • To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
  • To strategically profile the key players and comprehensively analyze their growth strategies.

In this study, the years considered to estimate the market size of Constant Velocity Universal Joint are as follows:

  • History Year: 2013–2017
  • Base Year: 2017
  • Estimated Year: 2018
  • Forecast Year 2018 to 2025

For the data information by region, company, type and application, 2017 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.

Key Stakeholders

  • Constant Velocity Universal Joint Manufacturers
  • Constant Velocity Universal Joint Distributors/Traders/Wholesalers
  • Constant Velocity Universal Joint Subcomponent Manufacturers
  • Industry Association
  • Downstream Vendors
  • Available Customizations

With the given market data, We offers customizations according to the company’s specific needs. The following customization options are available for the report:
Regional and country-level analysis of the Constant Velocity Universal Joint market, by end-use.
Detailed analysis and profiles of additional market players.

Get the Complete Report & TOC @ https://www.grandresearchstore.com/manufacturing-and-construction/global-constant-velocity-universal-joint-2018-333

Table of content

Global Constant Velocity Universal Joint Market Professional Survey Report 2018
1 Industry Overview of Constant Velocity Universal Joint
1.1 Definition and Specifications of Constant Velocity Universal Joint
1.1.1 Definition of Constant Velocity Universal Joint
1.1.2 Specifications of Constant Velocity Universal Joint
1.2 Classification of Constant Velocity Universal Joint
1.2.1 Ball Type
1.2.2 Fork Type
1.3 Applications of Constant Velocity Universal Joint
1.3.1 Passenger Vehicle
1.3.2 Commercial Vehicle
1.4 Market Segment by Regions

2 Manufacturing Cost Structure Analysis of Constant Velocity Universal Joint
2.1 Raw Material and Suppliers
2.2 Manufacturing Cost Structure Analysis of Constant Velocity Universal Joint
2.3 Manufacturing Process Analysis of Constant Velocity Universal Joint
2.4 Industry Chain Structure of Constant Velocity Universal Joint

3 Technical Data and Manufacturing Plants Analysis of Constant Velocity Universal Joint
3.1 Capacity and Commercial Production Date of Global Constant Velocity Universal Joint Major Manufacturers in 2017
3.2 Manufacturing Plants Distribution of Global Constant Velocity Universal Joint Major Manufacturers in 2017

Key questions answered in this report:

  1. What will the Constant Velocity Universal Joint Market the growth rate be in 2025?
  2. What are the key factors driving the Global Constant Velocity Universal Joint Market with a focus on the Chinese market?
  3. What are the key market trends impacting the growth of the Global Constant Velocity Universal Joint Market?
  4. What are the challenges to Global Constant Velocity Universal Joint Market growth?
  5. What are the market opportunities and threats faced by the vendors in the Global Constant Velocity Universal Joint Market industry?
  6. What are the key outcomes of the five forces analysis of Constant Velocity Universal Joint Market?

If You Have Any Question Related To This Report Contact Us @ https://www.grandresearchstore.com/enquire-now/global-constant-velocity-universal-joint-2018-333

Strategic suggestions and proposals for the beginners to understand Assessments of the market share from different countries and regions were conducted Top key market players, market share analysis included.

The market observations such as constraints, drivers, threats, opportunities, investment opportunities, challenges, and recommendations are added.

The competitive landscaping mappings of the ongoing trends are discussed. Based on the market estimations, the strategic recommendations are made in the business segments The competitive landscaping mappings of the current trends are detailed. Various companies detailed profiles are included.

The latest technology advancements are mapped with the trends of the supply chain. The analysis of competitiveness between different markets players are added to provide

CONTACT US:
276 5th Avenue, New York, NY 10001, United States
International: (+1) 646 781 7170 /+91 8087042414
Fax: +1(212)-634–4885
Email: [email protected]

Follow Us On linkedin :- www.linkedin.com/company/grand-research-store




Komal - Grand Research Store



GR-Store has a targeted view to provide business insights and consulting to assist its clients to make strategic business decisions and achieve sustainable growth in their respective market domain.